Samsung BN68-00951A-00 - Manual (Page 13)

The mains lead is attached to the rear of your television.
1 Plug the mains lead into an appropriate socket.
Result: The Standby indicator on the front of the television
lights up.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2 Press the power button on the front of the television (or POWER
(
) button on the remote control) to switch the television on.
Result: The programme that you were watching last is
re-selected automatically.
➢
If your television isn’t turned on when the POWER ( )
button is pressed, press the MODE button to check if
“TV” mode has been chosen.
➢
If you have not yet stored any channels, no clear picture
appears. Refer to “Storing Channels Automatically” on page
17 or “Storing Channels Manually” on page 18.
3 To switch your television off, press the power button again.
Switching Your Television On and Off
,
n
English - 13
Front of the TV
BN68-00951A-00Eng 8/3/05 3:06 PM Page 13