Savin 7800W - Manual (Page 31)

Copying onto Roll Paper
21
2
Copying onto Roll Paper
The paper will be fed to the copier from the Roll Feeder. You can copy onto roll
paper using the following functions:
• Synchro cutting
• Preset cutting
• Variable cutting
Note
❒ If unused roll paper is left in the copier, cut 1000mm (39.3") from the edge of
the paper before you start copying.
❒ When you want to copy a long original, curled original, or the thin original
(less than 0.1mm) which can be easily bent down, open the guides to keep the
original away from the paper entrance.
R
CAUTION:
Synchro Cutting
This function cuts roll paper automatically according to the original length.
Note
❒ This feature can cut length of paper in the range of 280mm to 3,000mm, 11”to
118”.
• If during copying your original gets stuck in the copier, press the
{Emergency Stop}
key.
• If you stop operation by pressing this key, remove the original.