Savin 7800W - Manual (Page 26)

Copying
16
2
J
After copying has finished, hold the original with one hand, press the
Clear/Stop key, and remove the original.
Note
❒ Do not hold down or pull out the original during copying. Do not put
heavy object on the original table.
❒ If you do not insert the original in a certain interval after inserting the pa-
per, the paper will be ejected automatically.
❒ If you do not insert the paper in a certain interval after the original, the
original will be ejected automatically.
❒ If the copier is idle for a certain interval after you have used it, the machine
resets itself to the initial settings (Auto Reset). If the copier is not used for
a long time, it will turn itself off (Auto Off ).
❒ You can preset the initial settings of the copier ⇒
P.38 “B) Changing the De-
fault Setting”
Manual Feed Mode
When you need to make larger sized paper, you can feed paper manually by us-
ing this function. If you want to feed manually, use the manual feed mode. This
function helps you to make larger sized copy and protect from the paper skew.
A
When the Wait indicator goes off and the Ready and the Set Original indi-
cator go on, the copier enters the ready condition.