Savin 7800W - Manual (Page 14)

4
The program indicator(LED) lights after
you store the setting.
11. {{{{Function Select}}}} key
Press to change which setting you are ed-
iting. The current selection is shown by
the indicators above the key:
• Paper Length
• Leading Edge
• Trailing Edge
• Copy Counter
Also used for copying a selected portion
of the original.
12. {{{{+}}}} and {{{{—}}}} key
Press to increase the value being edited.
Press to decrease the value being edited.
13. Leading Edge/Trailing Edge/
Copy Counter indicator
Displays the margin settings and the
number of copies made.
14. Roll Feeder indicator
Light up when you select Roll Feeder 1 or
2.
15. {{{{Paper Select/Cut}}}} key
Use to select the paper feed type such as
Roll feeder 1, 2 and Bypass Tray. Also
press to stop a copy job.
16. {{{{Copy Media}}}} key
Press to select the type of copy paper you
are using.
The copier will apply more or less heat
accordingly.
• The top indicator-Translucent paper
indicator
• The bottom indicator-Film indicator
17. {{{{Emergency Stop}}}} key
Press to stop the copying process imme-
diately.
Use if your original is getting stuck in the
copier.
If you stop operation by pressing this
key, remove the original.
18. Density indicator and
{{{{i
i i i} }}},
{ j j j j} }}}keys
Shows the density level the copies will
have.
Press the left key to make copies lighter.
Press the right key to make copies darker.
19. {{{{Start}}}} key
Press to start copying when you select
manual feed mode. Otherwise, the copy
job automatically start after you place
both paper and original. For details about
manual feed mode,
⇒
P.16 “Manual Feed
Mode”
20. Green indicator
Lights up when you select the manual
feed mode.
21. {{{{Clear/Stop}}}} key
When entering numbers, press to cancel.
While copying, press to stop copying.