1recommended paper – Savin 7800W User Manual

Page 18

Basics

Recommended Paper

Standard paper sizes that can be used in this copier are shown below.

Note

❒ When you make a copy on a non-standard size of paper, set the paper in the

bypass tray.

❒ Weight of paper suitable for this copier: 51g/m

, 14lb to 134g/m

, 36lb.

❒ Do not use the following kinds of paper or a paper jam might occur.

• Bent, folded, or creased paper
• Torn paper
• Perforated paper
• Non-smooth paper
• Slippery paper
• Thin paper that has low stiffness

❒ Do not make a copy on paper with any kind of coating, such as thermosensi-

tive paper, art paper, aluminum foil, and carbon paper. A fault might occur.

❒ Do not use paper with strong curls at the edges or corners. (Curls rising more

than 5mm (1/4") or falling more than 20mm (3/4") over a 40mm (1.5") radius.)

❒ When you make copies on film, take out the copies delivered to the copy exit

guide one sheet at a time and place them on a flat surface.

❒ If copying to natural tracing paper (all pulp, translucent paper) at a relative

humidity of 35% or less

If the paper was left out of its package for 5 minutes or more, remove
the first 1000mm (39.3") before copying.

If copies come out wavy or with white spots, use translucent paper in-
stead of natural tracing paper.

Always keep the paper in a bag when not using it.

• Store the paper in a sealed polyvinyl bag if not used for a long period.

If it gets humid, paper will curl or wave which can cause a paper jam or
part of the image not to be copied.

Metric ver-

sion

Inch ver-

sion

Bypass

Roll Feeder

E (36"

48")

D (24"

36")

C (18"

24")

B (12"

18")

A (9"

12")