Smeg SE2642ID3 - Manual (Page 16)

Instructions for the User
44
8.9 Timer clock
Press the timer selector until the timer clock light starts to flash. Set the time in minutes by
pressing the button or the button.
When the set time elapses, the buzzer sounds briefly and this can be deactivated by pressing any
button (except the on/off button).
Please note:
The timer clock continues to operate after the hob has turned off.
To modify the set time, turn on the hob by pressing the on/off button
.
8.10 Quick start cooking
Using this function, cooking starts at level 9 then is automatically reduced (levels 1 to 8) after a
determined period of time. When the quick start cooking function is activated, the power level also
needs to be set for the normal cooking period which will be selected automatically by the electronics.
Quick start cooking is suitable for foods that need to heat up quickly from cold and which can then
continue to cook without needing to be continually monitored (e.g. boiled meat).
1. Switch on a cooking zone. The function light should come on for the selected zone. If necessary,
press the cooking zone selector button.
2. Set power level 9. Press the button again to activate the quick start cooking function. The power
level indicator alternately shows the letter A and the number 9. When induction is taking place, A
and
are displayed if there are no saucepans on the cooking zone.
3. Then select a lower power level for the normal cooking process (1-8) by pressing the button . A
and the selected power for normal cooking flash intermittently.
4. This means that quick start cooking is operating correctly and, after a determined period of time
(see table), cooking will continue at the preset power level.
Power level set Quick start cooking
Time (min:sec)
1 0:48
2 2:24
3 3:50
4 5:12
5 6:48
6 2:00
7 2:48
8 3:36
9 -