Smeg MC30RA User Manual
Smeg Hobs
27
INSTRUCTIONS FOR THE USER: these instructions contain user recommendations, description of the
commands and the correct procedures for cleaning and maintenance of the appliance.
INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified technician who must
install the appliance, set it functioning and carry out an inspection test.
1. PRECAUTIONS FOR USE.................................................................................................................. 28
2. INSTRUCTIONS FOR DISPOSAL – OUR ENVIRONMENTAL CARE ............................................... 29
3. SAFETY INSTRUCTIONS................................................................................................................... 30
4. INTENDED USE OF THE APPLIANCE .............................................................................................. 32
4.1 Examples of outdoor use .............................................................................................................. 32
5. BEFORE INSTALLATION ................................................................................................................... 33
6. INSTALLATION ................................................................................................................................... 34
6.1 Installation on a support................................................................................................................ 34
6.2 Fitted installation (module only) .................................................................................................... 35
6.3 Fitted installation (with barbecue) ................................................................................................. 36
6.4 Fixed installation ........................................................................................................................... 37
6.5 Connection of the appliance to the gas cylinder (liquid gas connection) ...................................... 39
6.6 Check for any gas leaks................................................................................................................ 40
7. ADAPTATION TO DIFFERENT TYPES OF GAS ............................................................................... 41
7.1 Replacing nozzles......................................................................................................................... 41
8. CONNECTING THE APPLIANCE TO THE MAINS SUPPLY
(NATURAL GAS CONNECTION) ........................................................................................................ 42
8.1 Burner, nozzle and gas consumption characteristics.................................................................... 43
9. FINAL OPERATIONS FOR GAS APPLIANCES ................................................................................. 44
9.1 Adjusting the minimum for town and natural gas .......................................................................... 44
9.2 Adjusting the minimum for liquid gas ............................................................................................ 44
9.3 Lubrication of gas taps.................................................................................................................. 44
10. KNOW YOUR APPLIANCE............................................................................................................... 45
11. THE CONTROL PANEL ................................................................................................................... 46
12. USING THE APPLIANCE................................................................................................................. 47
12.1 Insertion and replacement of the battery .................................................................................... 47
12.2 Positioning the grid ..................................................................................................................... 47
13. USING THE HOB ............................................................................................................................. 48
13.1 Gas hob ...................................................................................................................................... 48
13.2 Practical tips for using the burners.............................................................................................. 48
13.3 Pan diameters............................................................................................................................. 49
14. CLEANING AND MAINTENANCE .................................................................................................... 50
14.1 Cleaning stainless steel .............................................................................................................. 50
14.2 Cleaning the gas components .................................................................................................... 50
Contents
Document Outline
- 1. PRECAUTIONS FOR USE
- 2. Instructions for disposal - Our environmental care
- 3. Safety instructions
- 4. intended use of the appliance
- 5. BEFORE INSTALLATION
- 6. INSTALLATION
- MEASUREMENTS FOR FITTED INSTALLATION
- MEASUREMENTS FOR EMBEDDED INSTALLATION OF THE MC30 MODULE + BARBECUE
- 6.4 Fixed installation
- 6.4.1 Installation of the module on a trolley placed side by side with the barbecue
- 6.4.2 Possible combinations
- 6.5 Connection of the appliance to the gas cylinder (liquid gas connection)
- 6.6 Check for any gas leaks
- 1 Open the gas valve on the LPG cylinder (or rotate the tap for Natural Gas supply), BUT DO NOT ATTEMPT TO LIGHT THE BURNERS.
- 2 With gas pressure in the hose, check for possible leaks on all the connections using a soap and water solution. Never use a naked flame to check for leaks.
- 3 In the event that there is a leak, bubbles will appear on the faulty connection where the gas is escaping.
- 4 Close the gas tap of the gas cylinder, tighten the leaking connection and then repeat the test.
- 5 If the gas leak persists, contact the nearest supplier.
- 7. ADAPTATION TO DIFFERENT TYPES OF GAS
- 7.1 Replacing nozzles
- 1 Extract the grid and remove all the caps and flame-spreader crowns;
- 2 Unscrew the burner nozzles with a 7 mm socket wrench;
- 3 Replace the burner nozzles according to the type of gas to be used (see point “8.1 Burner, nozzle and gas consumption characteristics”).
- 4 Replace the burners in the correct position.
- 7.1 Replacing nozzles
- 8. Connecting the appliance to the mains supply (natural gas connection)
- 9. Final operations for gas appliances
- 10. Know your appliance
- 11. the control panel
- 12. Using the Appliance
- 13. using the HOB
- 14. CLEANING AND MAINTENANCE