Smeg GKL64-3 User Manual
Smeg Hobs
Table of Contents
19
Precautions for safety and use ________________________ 20
Fitting the appliance in the top ________________________ 21
Fixing to the supporting structure _______________________________________21
Electrical connection________________________________ 23
Gas connection____________________________________ 24
Bottled gas connection _______________________________________________25
Room ventilation ____________________________________________________25
Combustion gas discharge ____________________________________________25
Adapting to different types of gas ______________________ 26
Removing the hob skin _______________________________________________26
Adjusting for bottled gas ______________________________________________27
Adjusting for town gas _______________________________________________27
Adjusting for natural gas ______________________________________________28
Adjusting the primary air flow __________________________________________28
Reassembling the hob skin____________________________________________28
Adjusting the minimum setting for natural gas and town gas __________________29
Adjusting the minimum for bottled gas ___________________________________29
Hob burner layout ___________________________________________________29
Greasing the gas taps________________________________________________29
Description of controls ______________________________ 30
The front panel _____________________________________________________30
Using the hob _____________________________________ 31
Lighting burners with safety device______________________________________31
Positioning the griddle plate ___________________________________________31
Practical hints for using the burners _____________________________________31
Pan diameters______________________________________________________32
Cleaning and maintenance ___________________________ 33
Cleaning stainless steel ______________________________________________33
Cleaning the components _____________________________________________33
THESE INSTRUCTIONS ONLY APPLY TO THE COUNTRIES OF DESTINATION WHOSE
IDENTIFICATION SYMBOLS ARE LISTED ON THE COVER OF THIS MANUAL.
THIS BUILT-IN HOB IS CLASSIFIED AS CLASS 3.
INSTRUCTIONS FOR THE INSTALLER: these are intended for the
qualified
engineer who is to check the gas supply system and install, commission and test the
appliance.
INSTRUCTIONS FOR THE USER: these provide recommendations for use, a
description of the controls and the correct procedures for cleaning and maintaining the
appliance.
Document Outline
- 1. Precautions for safety and use
- 2. Fitting the appliance in the top
- 3. Electrical connection
- 4. Gas connection
- 5. Adapting to different types of gas
- 5.1 Removing the hob skin
- Adjusting for bottled gas
- 5.3 Adjusting for town gas
- 5.4 Adjusting for natural gas
- Adjusting the primary air flow
- 5.6 Reassembling the hob skin
- 5.7 Adjusting the minimum setting for natural gas and town gas
- 5.8 Adjusting the minimum for bottled gas
- 5.9 Hob burner layout
- 5.10 Greasing the gas taps
- 6. Description of controls
- 7. Using the hob
- 8. Cleaning and maintenance