Swann ADVANCED-SERIES H.264 - Manual (Page 2)

FCC Verification:
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV technician for help
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. These devices may not cause harmful interference, and
2. These devices must accept any interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE: Prohibition against eavesdropping
Except for the operations of law enforcement officers conducted under lawful authority, no person
shall use, either directly or indirectly, a device operated pursuant to the provisions of this Part for the
purpose of overhearing or recording the private conversations of others unless such use is authorized
by all of the parties engaging in the conversation.
WARNING: Modifications not approved by the party responsible for compliance could void user’s
authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS:
•
Make sure product is fixed correctly and stable if fastened in place
• Do not operate if wires and terminals are exposed
• Do not cover vents on the side or back of the DVR and allow adequate space for ventilation
Before You Begin
2
DEFAULT PASSWORD INFORMATION
To ensure your privacy, this DVR supports password protection.
• There is no “default” password - until you set a password and enable password protection, the
DVR will not ask you for one.
• To ensure your ongoing privacy, we strongly recommend setting a password as soon as possible.
Choose something that you’ll remember, but that others would be unlikely to guess.
• If you do manage to lock yourself out of the DVR, you’ll need to contact us at the Swann Technical
Support Telephone Helpdesk - the number is on the back cover.