SUPER MICRO Computer SUPERSERVER 6015B-T - Manual (Page 14)

S UPER S ERVER 6015B-T+/6015B-8+ Manual
1-4
1-3 Server Chassis Features
The SC815TQ-700/SC815S-700 is one of Supermicro's third-generation 1U chas-
sis and features four hot-swap drive bays for SATA/SCSI drives, a slim DVD-ROM
drive, a slim 3.5" fl oppy drive and a revolutionary cooling design that can keep
today's most powerful processors running well below their temperature thresh-
olds. The following is a general outline of the main features of the SC815TQ-
700/SC815S-700 chassis.
System Power
The SC815TQ-700/SC815S-700 chassis includes a single 700W cold-swap power
supply.
Serial ATA Subsystem (6015B-T+)
For the 6015B-T+, the SC815TQ-700 chassis was designed to support four Serial
ATA hard drives, which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
SCSI Subsystem (6015B-8+)
For the 6015B-8+, the SC815S-700 chassis was designed to support four SCSI
hard drives, which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SCSI drives.
Control Panel
The SC815TQ-700/SC815S-700 control panel provides important system monitor-
ing and control information. LEDs indicate power on, network activity, hard disk
drive activity and system overheat conditions. Also present are a main power
button and a system reset button.
I/O Backplane
The SC815TQ-700/SC815S-700 is a 1U rackmount chassis. Its I/O backplane
provides one full-height full-length and one low profi le slot for PCI add-on cards,
one COM port (the other is internal), one VGA port, two USB ports, PS/2 mouse
and keyboard ports and two Ethernet (LAN) ports.