SUPER MICRO Computer SUPERSERVER 6015B-T - Manual (Page 13)

Chapter 1: Introduction
1-3
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SCSI drives.
PCI Expansion Slots
Two riser cards have been included with the server to support server PCI expan-
sion. The CSE-RR1U-X riser fi ts into the 133 MHz PCI-X slot to support a standard
size (full-height, full-length) PCI-X add-on card (any speed). The CSE-RR1U-EL
fi ts into the PCI-E slot to support one standard size PCI-E add-on card. You may
only use one riser card at a time.
ATI Graphics Controller
The X7DBR-i+/X7DBR-8+ features an integrated ATI video controller based on the
ES1000 graphics chip. The ES1000 was designed specifi cally for servers, featuring
low power consumption, high reliability and superior longevity.
Onboard Controllers/Ports
The X7DBR-i+/X7DBR-8+ provides one fl oppy drive controller and two onboard
IDE controllers, which support up to four hard drives or ATAPI devices. Backpanel
I/O ports include one COM port, two USB ports, PS/2 mouse and keyboard ports
and a video (monitor) port. An Intel 82563EB Ethernet controller is also included
to support two Gb LAN ports.
Other Features
Other onboard features are included to promote system health. These include
various voltage monitors, two CPU temperature sensors, four fan speed sensors,
a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.