SUPER MICRO Computer SUPERSERVER 6015B-T - Manual (Page 121)

D-1
Appendix D: System Specifi cations
Appendix D
System Specifi cations
Processors
Single or dual Intel® Xeon™ 5100/5000 Sequence processors at a front side
(system) bus speed of 1333/1066/667 MHz.
Note: Please refer to our web site for a complete listing of supported processors.
Chipset
Intel 5000P chipset
BIOS
8 Mb Phoenix® Flash ROM
Memory Capacity
Sixteen 240-pin DIMM sockets supporting up to 64 GB of FBD DDR2-667/533
SDRAM.
Note: Dual channel memory - requires memory to be installed two modules at a time. See the
memory section in Chapter 5 for details.
SATA Controller
Intel ESB2 on-chip controller for a 4-port, 3 Gb/s Serial ATA subsystem (RAID
0,1 and JBOD supported)
SCSI Controller (6015B-8+)
AIC-7902 for dual channel Ultra320 SCSI
SATA/SCSI Drive Bays
Four (4) hot-swap drive bays to house four (4) standard SATA or SCSI drives
Peripheral Drive Bays
One (1) slim fl oppy drive (optional)
One (1) slim DVD-ROM drive