StarTech.com CONYX ECS0016 - Manual (Page 9)

Instruction Manual
2
Initial Configuration
Unpack the ECS0016 kit and verify you have all of the parts indicated in
the
Package Contents list shown on the previous page, and that they all
appear in good working order.
If you are installing your ECS0016 in a rack, you will need to attach the
rack-mounting brackets supplied with the unit, and install the unit in the
rack. Following this, proceed to connect your ECS0016 to the network, as
well as to the serial ports of the controlled devices, and to an power outlet
as outlined below.
Power Connection
The ECS0016 and CM4148 models have a built-in universal
autoswitching AC power supply. This power supply accepts AC input
voltage between 100 and 240 VAC with a frequency of 50 or 60 Hz and
the power consumption is less than 20W.
The ECS0016 has an IEC AC power socket located at the rear of the
metal case, which uses a conventional IEC AC power cord. The North
American power cord is provided by default.
There is a warning notice printed on the back of each unit:
AC power socket