StarTech.com CONYX ECS0016 - Manual (Page 102)

Instruction Manual
95
The following command will synchronize the live system with the new
configuration:
# /bin/config –-run=time
Time Zone
To change the system time zone USA eastern standard time you need to
issue the following commands:
# /bin/config –-set=config.system.timezone=US/Eastern
The following command will synchronize the live system with the new
configuration.
# /bin/config –-run=time
Network Configuration
IP Configuration - DHCP
To enable a DHCP client on the LAN interface (eth0) from the gateway
command line:
# /bin/config –-set=config.interfaces.eth0.mode=dhcp
The following command will synchronize the live system with the new
configuration.
# /bin/config –-run=ipconfig
Note: “/bin/config” commands can be combined into one command for
convenience.
Please note that supported interface modes are ‘dhcp’ and ‘static’.