English – SMC Networks SMC2662W-AR User Manual

Page 7

English

4. Finish the driver installation.

5. If you want to add more protocols after installation, go to

control panel and double click on "Network and Dial-up
Connections" and double click "Local Area Connection X",
click "Properties".

6. Select the "General" tab and click "install" to install the

network protocols you want to use, such as IPX/SPX,
NetBEUI or TCP/IP. If you install TCP/IP, be sure to set the
appropriate Gateway, DNS Server, and Domain for your
network. If you install an IPX/SPX compatible protocol,
then you also need to install the Client for NetWare
Networks.

CONFIGURATION AND DIAGNOSTIC UTILITY

SMC’s EZ Connect Wireless USB adapter provides free optional
management software for quick network configuration and easy
diagnostics. The CD-Rom that comes with the package contains a
user-friendly interface for configuring the EZ Connect Wireless USB
Adapter.

Utility Installation

To install the utility software:
1. Insert the CD-Rom that comes with this package into your

computer’s CD-Rom drive (D:\).

2. Select the folder "D:\Drivers\SMC2662W-AR" and double

click on "setup.exe".

3. Follow the on-screen instructions to finish installation.

Using the Wireless LAN Utility
Once the installation is completed, the configuration utility can be
accessed by selecting the "EZ Connect Wireless USB Utility" icon
from the "EZ Connect Wireless USB" folder.