SMC Networks SMC2662W-AR - Manual (Page 2)

EZ Connect Wireless USB adapter Manual
The 11 Mbps wireless USB adapter is an easy to use, cost-effective,
high-speed and secure wireless networking device for the
networked SOHO environment. It allows users to share network
resources and provides instant access to the internet.
Using this adapter in conjunction with SMC’s EZ Connect Wireless
Access Point, you can create an instant network that integrates
seamlessly with 10 Mbps Ethernet LANs. Moreover, moving or
expanding your network is as easy as moving or installing
additional Access Points - no wires!
PACKAGE CHECKLIST
The EZ Connect Wireless USB Adapter package includes:
• 1 EZ Connect Wireless USB Adapter with dual dipole antenna
(SMC2662W-AR)
• 1 Installation CD-Rom
• 1 USB cable
• This User Guide
English
English
System Requirements
Before you install the EZ Connect Wireless USB Adapter, check your
system for the following requirements:
• An available USB port in your computer.
• Windows 98/Me/2000 (Have the Windows installation
CD-ROM ready for use during installation).
• A minimum of 1 MB of free disk space for installing the
driver and utility program.
• Another IEEE 802.11b compliant device installed in your
network, such as the SMC2655W Wireless Access Point, or
the SMC2662W Wireless USB Adapter.
INSTALLATION
WARNING:
• Backup your driver CD-Rom and use the copy as the working
diskette to protect the original from accidental damage.
1. Select an unused USB port and remove its protective
bracket.
2. Carefully insert the USB cable and press until it is firmly
seated in the USB port.
3. Install the appropriate network driver for your operating
system. Drivers can be found on the CD-Rom that comes
with this package.
4. Install the configuration program for your wireless USB
adapter. The SETUP.EXE file can be found on the CD-Rom
with this package.(D:\Drivers\SMC2662W\Utility\setup.exe)
1 2