Seagate STT8000A - Manual (Page 22)

Chapter 2 Specifications
Page 14 STT8000A Product Manual
Regulatory compliance
The STT8000A complies with the regulations listed in the following table.
Agency Regulation
CSA C22.2, No. 950-M89
TUV & IEC-RHEINLAND EN 60 950/IEC 950
UL 1950
Canadian Dept. of Communications Class B
EN55022 (CISPR-22)
with additional CE-Mark test requirements Class B
FCC Class B, Part 15
Use the STT8000A only in equipment where the combination has been determined
to be suitable by an appropriate certification organization (for example, Underwriters
Laboratories Inc. or the Canadian Standards Association in North America). You
should also consider the following safety points.
•
Install the drive in an enclosure that limits the user's access to live parts, gives
adequate system stability, and provides the necessary grounding for the drive.
•
Provide the correct voltages (+5 VDC and +12 VDC) based on the regulation
applied—Extra Low Voltage (SEC) for UL and CSA and Safety Extra Low
Voltage for BSI and VDE (if applicable).