Seagate BARRACUDA ST3160318AS User Manual
Seagate Hardware
Table of contents
Document Outline
- 1.0 Introduction 1
- 2.0 Drive specifications 3
- 2.1 Formatted capacity 10
- 2.2 Default logical geometry 10
- 2.3 Recording and interface technology 11
- 2.4 Physical characteristics 11
- 2.5 Seek time 12
- 2.6 Start/stop times 12
- 2.7 Power specifications 13
- 2.8 Environmental specifications 15
- 2.9 Acoustics 17
- 2.10 Electromagnetic immunity 17
- 2.11 Reliability 18
- 2.12 Agency certification 18
- 2.13 Environmental protection 20
- 2.14 Corrosive environment 20
- 3.0 Configuring and mounting the drive 21
- 4.0 Serial ATA (SATA) interface 25
- 5.0 Seagate Technology support services 35
- Figure 1. Serial ATA connectors 22
- Figure 2. Attaching SATA cabling 22
- Figure 3. Mounting dimensions (1000 and 750 GB models) 23
- Figure 4. Mounting dimensions (500, 320, 250 and 160 GB models) 24
- 1.0 Introduction
- 2.0 Drive specifications
- 2.1 Formatted capacity
- 2.2 Default logical geometry
- 2.3 Recording and interface technology
- 2.4 Physical characteristics
- 2.5 Seek time
- 2.6 Start/stop times
- 2.7 Power specifications
- 2.8 Environmental specifications
- 2.9 Acoustics
- 2.10 Electromagnetic immunity
- 2.11 Reliability
- 2.12 Agency certification
- 2.13 Environmental protection
- 2.14 Corrosive environment
- 3.0 Configuring and mounting the drive
- 4.0 Serial ATA (SATA) interface
- 5.0 Seagate Technology support services
- Index