Sagem M2002 - Manual (Page 40)

Sounds
39
From the Sounds menu select Silent mode and Select.
Activate or deactivate Silent mode and accept.
Silent mode can also be accessed via the home page by holding
down the
0 0key.
When the device is in silent mode, the relevant icon appears on
the home page.
In this mode the ring tone will not function, except for the alarm
clock.
Silent mode
Beeps
Sounds
Back Select
Sounds
Back Select
From the Sounds menu choose the Beeps menu and Select.
Select the type of beep you want to allocate from the proposed
choices (Key beep, Network beep or Battery beep) and accept.
Activate or deactivate the beep and accept.
In the case of key beeps, you can also choose from the two
types of beeps offered: key beeps or Dtmf tone (different beep
depending on the key pressed).
Beeps
Silent mode
This menu allows you to switch to Silent mode.
This menu allows you to activate a beep for each type of event.
Attention: vibrate mode is not a priority in relation to the choice of
ring tones in the call groups. To make vibrate mode apply in ge-
neral, switch to Silent mode.
72 pages MYX5-eng 11/8/02 5:58 PM Page 39