Sagem M2002 - Manual (Page 35)

34
Configuration of WAP and GPRS parameters:
All information to be entered in the parameters are provided by
your operator or access provider.
- Choose desired access service, then press Choice.
- Enter title of service and accept.
- Enter Internet address of home page and accept.
- Enter parameters of preferred logon:
GPRS otherwise GSM (by default): the logon to WAP services
uses the GPRS as a priority. However, in the event of unavai-
lability of the GPRS network, the GSM network is used to
establish the link.
GPRS: the logon to WAP services uses the GPRS network
exclusively.
GSM: the logon to WAP services uses the GSM network
exclusively.
The GSM parameters to be entered are:
- User name
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- Call number
- Access mode (digital, analogue or automatic)
In automatic mode access can be gained to the operator's network
by a digital link and by an analogue link to a different network (in
roaming).
WAP
72 pages MYX5-eng 11/8/02 5:58 PM Page 34