Sharp DV-NC150U - Manual (Page 14)

Hint Hint
• To go back one step, press the
s
button (during
the steps [3] to [9].)
– 14 – EN
VCR Functions
On-Screen Operations
1 1 To call up the main menu
4 4 To exit the menu
-MENU-
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2 2 To select an item
-MENU-
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
3 3 To decide
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
MENU
CLEAR/
C.RESET
STOP
PLAY
1 2 3
4 5 6
7 8 9
0 +10
DISPLAY
SKIP CH.
SLOW
VCR TV
PAUSE
REC OTR
ENTER
RETURN TOP MENU
MENU
SETUP
CLEAR C.RESET ZOOM MODE SEARCH MODE
A-B ANGLE REPEAT SUBTITLE
T-SET
DVD VCR
VCR / DVD COMBINATION
1 1
4 4
3 3
2 2
MENU
OR 4 4
Recording Features
•Insert a tape with its record tab into the VCR/DVD.
8 8 ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE
0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END
TIME 0 8 : 3 0 PM
CHANNEL 1 6
REC SPEED – –
2 2
PROGRAM NUMBER 4
DATE
– – / – –
START TIME – – : – – – –
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
3 3
PROGRAM NUMBER 4
B ONCE
DAILY
WEEKLY
4 4 Select the desired month
Select the desired day
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE
0 5 / 0 3 MON
START TIME – – : – – – –
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
1 1
-MENU-
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
[ON]
SAP
MENU
Select an empty program
number
Select “ONCE”, “DAILY”
(Mon-Fri), or “WEEKLY”
5 5 Select the desired start time
(hour)
Select the minute
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE
0 5 / 0 3 MON
START TIME 0 7 : 3 0 – –
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
6 6 ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE
0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
AM
B PM
Select “AM” or “PM”
7 7 Repeat the procedure in steps 5
and 6 to set the end time.
Select the desired channel
Timer Recording
• If you have connected the VCR/DVD to a
cable box or satellite box as the
Connection A on page 8, select the VCR
to channel 3 or 4 (the RF output channel
of the VCR). Then, select the desired
channel at the cable box or satellite box.
Leave the cable box or satellite box on for
timer recording.
• You can program one
year in advance.
9 9 ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE
0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END
TIME 0 8 : 3 0 PM
CHANNEL 1 6
REC SPEED SP B SP
SLP
Select the desired recording speed
10 10
• TIMER light lights up on the front panel,
and appears in the front panel display.
The VCR/DVD will change to the DVD mode.
CLEAR/
C.RESET
SUBTITLE
T-SET
1) Press the SUBTITLE/T-SET button
then, the VCR button on the remote
control.
2) Select main menu by pressing the
MENU button.
3) Select "TIMER PROGRAMMING"
by pressing the K or L button.
Then, press the B button.
4) Select the program number which
you want to check by pressing the K
or L button. The details of the pro-
gram you selected will appear on
the TV screen.
• Go to the digit you want to change
by pressing the B or s button.
Then, enter correct numbers by
pressing the K or L button.
• You may cancel the entire program
by pressing the s button while the
program number flashes.
5) Press the CLEAR/C.RESET button
to exit.
6) Press the SUBTITLE/T-SET button
to return to timer stand-by mode.
Press the STOP/EJECT button on
the VCR/DVD.
To cancel a Timer Recording in
progress
To Check, Correct, or Cancel a
Timer Program
VCR VCR
VCR VCR
or
or
or
or
or
or
or
or
or
or
VCR
VCR
• To set another program after step [9], press the
B
button. Then, continue with step [2].