Sharp DV-NC150U - Manual (Page 13)

Hint Hint
• When a tape with-
out record tab is
inserted, the
VCR/DVD will start
playback automati-
cally.
• Tracking will be
automatically
adjusted upon play-
back. To adjust the
tracking manually,
press the SKIP/CH.
(K/L) buttons.
– 13 – EN
VCR Functions
Recording & OTR (One Touch Recording)
Playback
CH
( TRACKING )
VCR O
REW FF PLAY REC TIMER STOP/
EJECT
POWER OPEN/CLOSE
AV IN 2 VIDEO L(MONO)-AUDIO-R
DVD
PLAYB
STOP
PLAY
1 2 3
4 5 6
7 8 9
0 +10
POWER SPEED AUDIO
DISPLAY
SKIP CH.
SLOW
VCR TV
PAUSE
REC OTR
DVD VCR
Before:
Turn on the TV and set it to
channel 3.
• If channel 3 is already occupied for broad-
casting, see “RF Output Channel” section.
* See page 11 to switch
the VCR/DVD function.
1 1
2 2 3 3
4 4
1 1 2 2
STOP EJECT A
3 3 4 4
TV Screen Remote Control
PLAY
STOP STOP/EJECT
[VCR/DVD]
/
Accidental erasure prevention
To prevent accidental recording on a record-
ed cassette, remove its record tab. To record
on it later, cover the hole with cellophane
tape.
Record tab
• Select the
desired channel
1 1 2 2
with tab
SP
• Select the desired tape
speed
3 3
REC
4 4
Type of tape T60 T120 T160
SP mode 1hour 2hours 2-2/3hours
SLP mode 3hour 6hour 8hour
Tape Speed Recording/Playback Time
CH12
TV Screen Remote Control
1 2 3
4 5 6
7 8 9
0
SPEED
REC/OTR
REC OTR(0:30) OTR(1:00).....
(Normal recording)
OTR(8:00) OTR(7:30)
5 5 6 6
STOP STOP/EJECT
[VCR/DVD]
/
Before:
Turn on the TV and set it to
channel 3.
• If channel 3 is already occupied for
broadcasting, see “RF Output Channel” section.
3 3
2 2
CH
( TRACKING )
VCR REW FF PLAY REC TIMER STOP/
EJECT
POWER OPEN/CLOSE
AV IN 2 VIDEO L(MONO)-AUDIO-R
DVD
STOP
PLAY
1 2 3
4 5 6
7 8 9
0 +10
POWER SPEED AUDIO
DISPLAY
SKIP CH.
SLOW
VCR TV
PAUSE
REC OTR
ENTER
RETURN TOP MENU
MENU
SETUP
CLEAR SEARCH
DVD VCR
1 1
5 5
6 6
5 5
2 2
2 2
3 3
4 4
Hint Hint
• To view one chan-
nel while recording
another
1) While you are
recording on the
VCR/DVD, press the
VCR/TV button so
that the “VCR” light
disappears on the
VCR/DVD.
2) At the cable box
or satellite box,
select the channel
you want to view.
• If you have connect-
ed the VCR/DVD to
a cable box or satel-
lite box, refer to
“Hint for Cable Box
or Satellite Box”
section on page 8.
STOP EJECT A
You can select a fixed recording time by press-
ing the REC/OTR button repeatedly.
To cue or review picture during playback
(Picture Search)
Press the g or h button.
• Press it again and the VCR/DVD will search in
super high speed. (in the SLP mode only)
To freeze the picture on TV screen during play-
back (Still mode)
Press the PAUSE button. Each time you press the
button, the picture will be forwarded by one frame.
• If the picture begins to vibrate vertically during the
still mode, stabilize the picture by pressing the
SKIP/CH. (K/L) buttons.
• If the picture is distorted or rolling vertically, adjust
the vertical hold control on your TV, if equipped.
Counter Reset
Press the CLEAR/C.RESET button.
To play back in slow motion
Press the SLOW button during playback or the still
mode.
• If the noise bars appear on the TV screen, you can
reduce it by pressing the SKIP/CH. (K/L) buttons.
Auto Rewind
When a tape reaches its end during playback, fast-for-
ward, or recording (except timer recording and One
Touch Recording), the tape will automatically rewind
to the beginning. After rewinding finishes, the
VCR/DVD will eject the tape.
Other Operations
Hint Hint
• Still/Slow/Pause
mode will be
automatically
cancelled after 5
minutes to pre-
vent damage to
the tape and the
video head.
• To return to
playback from
the Picture
Search/Still/
Slow mode,
press the PLAY
button.
VCR Functions
4 4
SKIP/CH.
VCR VCR
VCR VCR
You CANNOT copy a DVD to a videotape.
To stop recording temporarily (Pause mode)
Press the PAUSE button.
• During the rec-pause mode, five C marks appear on the TV
screen. Each C mark represents one minute.
• Press it again to resume recording.
VCR
VCR