SMC Networks Barricade SMC7908VoWBRA2 - Manual (Page 72)

C
ONFIGURING THE
V
OICE
ADSL R
OUTER
4-36
Channel and SSID
You must specify a common radio channel and SSID (Service Set ID) to
be used by the Barricade and all of its wireless clients. Be sure you
configure all of its clients to the same values.
Parameter Description
SSID Service Set ID. The SSID must be the same on the Barricade
and all of its wireless clients.
SSID Broadcast Enable or disable the broadcasting of the SSID. Disabling SSID
broadcast will provide increased security by hiding the SSID of
your wireless network.
Wireless Mode This device supports both 11g and 11b wireless networks. Make
your selection depending on the type of wireless network that
you have. SMC recommend using “Mixed (11b+11g)” to
provide compatibility with both 11b and 11g wireless clients.
Channel The radio channel used by the wireless router and its clients to
communicate with each other. This channel must be the same
on the Barricade and all of its wireless clients.
The Barricade will automatically assign itself a radio channel, or
you may select one manually.