SMC Networks Barricade SMC7908VoWBRA2 - Manual (Page 69)

A
DVANCED
S
ETUP
4-33
VLAN
The Barricade’s VLAN function can be used to create up to 4 VLAN
profiles. Once a VLAN profile is created interfaces can be assigned to the
VLAN profile. This is done by setting the VLAN binding.
Notes: Only interfaces of IEEE 802 bridging type (LAN ports 1-4 and
1483 Bridging PVC’s) can be assigned to a VLAN.
Click Add VLAN to create a profile.
IP Address Pool
Start IP Address Specify the start IP address of the DHCP pool. Do not include
the gateway address of the Barricade in the client address pool.
If you change the pool range, make sure the first three octets
match the gateway’s IP address, i.e., 192.168.2.xxx.
End IP Address Specify the end IP address of the DHCP pool.
Domain Name If your network uses a domain name, enter it here. Otherwise,
leave this field blank.
Parameter Description