SMC Networks Barricade SMC7908VoWBRA2 - Manual (Page 108)

C
ONFIGURING THE
V
OICE
ADSL R
OUTER
4-72
The following items are included on this information screen:
Parameter Description
Status
Line Status Shows the current status of the ADSL line connection.
Data Rate
Upstream Maximum upstream data rate.
Downstream Maximum downstream data rate.
Operation Data/Defect Indication
Noise Margin Maximum upstream and downstream noise margin.
Output Power Maximum fluctuation in the output power.
Attenuation Maximum reduction in the strength of the upstream and
downstream signal.
Fast Path FEC
Correction
There are two latency paths that may be used: fast and
interleaved. For either path, a forward error correction
(FEC) scheme is employed to ensure higher data
integrity. For maximum noise immunity, an interleaver
may be used to supplement FEC.
Interleaved Path FEC
Correction
An interleaver is basically a buffer used to introduce a
delay, allowing for additional error correction techniques
to handle noise. Interleaving slows the data flow and
may not be optimal for real-time signals such as video
transmission.
Fast Path CRC Error The number of Fast Path Cyclic Redundancy Check
errors.
Interleaved Path CRC
Error
The number of Interleaved Path Cyclic Redundancy
Check errors.
Loss of Signal Defect Momentary signal discontinuities.
Loss of Frame Defect Failures due to loss of frames.
Loss of Power Defect Failures due to loss of power.
Fast Path HEC Error
Fast Path Header Error Concealment errors.
Interleaved Path HEC
Error
Interleaved Path Header Error Concealment errors.
Statistics
Received Cells Number of cells received.
Transmitted Cells Number of cells transmitted.