Adjusting the convergence manually – Sony KDP-51WS550 User Manual
Page 44
43
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Adjusting the Convergence Manually
The Convergence feature gives you more control over the picture’s
convergence than the Flash Focus feature, allowing you to fine-tune the
convergence.
1
Press
MENU
to display the Menu.
2
Move the joystick
B
or
b
to highlight the Setup icon and press
.
3
Move the joystick to highlight
Convergence
and press
.
A pattern of white crosses appears, with a yellow around one
of the crosses. Aligned crosses (which do not need adjustment)
look white and have little or no red or blue showing. Crosses that
are not aligned show red or blue shades beyond their edges.
You can scroll up and down through the 9 x 7 field of crosses to
manually converge all portions of the screen.
4
Using the joystick, move the to surround a cross that you want
to adjust. Press
. The changes to red.
5
If the cross that you selected has red edges, move the joystick
until the red image is replaced with a white cross. Once you have
finished this (or the cross does not have red edges), press
. The
changes to blue.
6
If the cross you selected has blue edges, move the joystick until
the blue image is replaced with a white cross. Once you have
finished this, press
. The changes to yellow again.
7