Sony KDP-51WS550 - Manual (Page 36)

35
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ... Do This ...
Watch the DVD player Press TV/VIDEO repeatedly to select the DVD input (VIDEO 5 in the
illustration).
Set up the TV remote control
to operate the DVD player If you have a non-Sony DVD player, you must program the remote control.
See “Programming the Remote Control” on pages 49-50.
Activate the TV remote
control to operate the DVD
player Open the outside cover, as shown on page 48. Then set the A/V slide switch
to the position you programmed for the DVD player.
Control DVD functions with
the TV remote control See “Operating a DVD Player” on page 52.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on pages 103-104.
✍
You cannot record the signal from any equipment connected into the Y, P B ,
P R jacks.
AX1 PJ.book Page 35 Wednesday, April 30, 2003 2:13 PM