Samsung DCS KEYSET - Manual (Page 57)

Samsung DCS Keyset User Guide
– 48 –
Customising Your Keyset
Select Ring Tone
You can select one of eight ring tones for your keyset.
1. While on-hook, press the
TRSF
key and dial 111.
2. Dial a number 1–8 or press the
VOLUME
Up and Down keys to
hear each tone.
3. When you hear the tone that you want, press the
TRSF
key.
Change Your Passcode
By default, your extension passcode is 1234. You can change this
passcode to any 4-digit number.
1. While on-hook, press the
TRSF
key and dial 101.
2. Dial your existing (old) passcode.
3. Dial a new passcode (must be four characters, e.g. 3456). You
can use numbers 0–9.
4. Redial the new passcode to verify. If successful, you will hear
two beeps. (Four beeps indicate an invalid code and you should
enter the code again.)
5. Press the
TRSF
key to store the new passcode.
Set Answer Mode
You can receive internal calls in one of three modes: Ringing, Auto
Answer or Voice Announce (see Answering Internal Calls in the sec-
tion ‘Internal Calls’ for details):
1. While on-hook, press the
TRSF
key and dial 103.
2. Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.
(Or use the
VOLUME
Up/Down keys to select.)
3. Press the
TRSF
key to store your selection.