Nat setting using ap manager – Samsung SWL-4000AP User Manual

Page 26

7. NAT Setting Using AP Manager

① NAT stands for Network Address Translation, and it is used to establish private

network domain. Using NAT, any desktop or notebook PC, which are

connected to AP, may freely use any private IP Address. In this case, the

private IP Address must have same Network Address assigned for NAT IP

Address.

For Example)

NAT IP Address

: 172.16.0.1

Station IP Address #1 : 172.16.0.100

Station IP Address #2 : 172.16.0.150

In this case, Network Address is 172.16.0.X.

② After you select [Server] tab of AP Manager, select [NAT] on Dialogue Box. In

this case, enter Gateway Address you select on “IP Address” of [NAT]. The

default setting value is “172.16.0.1”.

Select [Server] Tab

NAT Setting

IP Address and

Subnet Mask Setting