Sprint Nextel 550 - Manual (Page 86)

Section 3: Using the PCS Connection Card
80 3D: Menu Options
Voice Tab
Table 9: Voice Tab Options
Field Description
Auto-Answer Incoming Calls This field allows you to enable and disable the
Auto-Answer feature.
To disable the feature, select off from the drop-down
menu. To enable the feature, select the number of
rings after which the PCS Connection Manager
Software automatically answers the voice call.
Auto-Retry This field allows you to enable and disable the
Auto-Retry feature and, when enabled, to select the
interval between retrys.
When a large number of users are connected to a
single base station on the CDMA network, you may
be unable to make a network connection on your
first attempt. When enabled, Auto-Retry attempts
the connection up to five times at the interval you
select. When disabled, the card does not retry.
To disable the feature, select off . Otherwise, select the
interval at which you want automatic retrys to occur.
Any-Key Answer This field allows you to enable and disable the
Any-Key Answer feature.
When enabled, you can answer an incoming call by
clicking any button on the keypad except
END and
BACK . On the Pocket PC, you can also use any of
the four application buttons. On a notebook or
Handheld PC, you can also use keys on your
keyboard: A through Z, 0 through 9 and the
* or # key.
When disabled, you must use the TALK key to answer
incoming calls.
Use the check box to enable and disable the feature.
(The feature is enabled when checked.)