Windows me, Enter, Where – Sprint Nextel 550 User Manual
Page 110: Click, Locate the existing driver, Open the control panel by selecting, If the system icon is not in the window, Double click the, Icon, Click the
Section 3: Using the PCS Connection Card
104 3F: Troubleshooting Tips (Notebook PC)
9.
Enter
d:\Drivers\Win2k
, where
d
is the drive letter for your CD-ROM
drive, and click
OK
to proceed.
10.
Click
Next
.
11.
If the Digital Signature Not Found window displays, click
Yes
.
12.
Click
Finish
to proceed. Repeat steps 6 to 12 as prompted.
If you are prompted to restart your PC, click
Yes
. Otherwise, restart your
PC from the Start menu. (You must restart your PC to complete the driver
installation.) The correct driver is then installed.
Windows Me
To verify that the correct driver is installed:
ᮣ
Locate the existing driver
ᮣ
Replace the driver with the Windows Me driver from the
PCS Connection Card installation CD.
Locating the Existing Driver
1.
Open the Control Panel by selecting
Start > Settings > Control
Panel
.
2.
If the System icon is not in the window,
view all Control Panel
options
.
3.
Double click the
System
icon.
4.
Click the
Device Manager
tab.
5.
Locate the PCS Connection Card entries by using the “+” signs to
expand the listings. (For example, to see all the installed modems,
click the “+” sign to the left of
Modems
.) The card should
have 3 entries:
ᮣ
The card should display under
Multifunction adapters
as
Sierra Wireless AirCard 550 PC Card Parent
.
ᮣ
The card should display under
Modems
as
Sierra Wireless
AirCard 550 Modem
.
ᮣ
The card should display under
Network adapters
as
Sierra
Wireless AirCard 550 Adapter
.
If the listings above do not appear, identify the listing for the
PCS Connection Card by ejecting the card. This causes the driver
listing for the card to disappear from the list. Reinsert the card again
to cause the driver listing to reappear. You can identify the entries for