Sprint Nextel 550 - Manual (Page 118)

Section 3: Using the PCS Connection Card
112 3F: Troubleshooting Tips (Notebook PC)
7.
If you are prompted for a file when the PC restarts, enter
d:\Drivers\WinMe
where
d
is the drive letter of your CD-ROM drive
and click
OK
to proceed.
8.
If the Add New Hardware Wizard appears, follow these instructions:
ᮣ
Click
Specify the location of the driver (Advanced)
on the
first window of the Add New Hardware Wizard and click
Next
to
proceed.
ᮣ
Select the Search for the best driver for your device radio
button, and the
Specify a location
check box, then enter
d:\Drivers\WinMe
where
d
is the drive letter of your CD-ROM
drive. Click
Next
to proceed to the next window.
ᮣ
If prompted, “What would you like to install?”, select
The
updated software (Recommended)
and click
Next
.
ᮣ
Click
Next
on the window that displays a file name.
ᮣ
Click
Finish
and repeat steps 1 to 4 as prompted.
ᮣ
If you are prompted to restart your PC, click Yes . Otherwise,
restart your PC from the Start menu. (You must restart your PC
to complete the driver installation.)
Windows XP
To resolve a resource conflict in Windows XP:
ᮣ
Disable a device (internal modem, infrared device, or network card)
ᮣ
Uninstall and reinstall the PCS Connection Card driver
Disabling an Internal Modem, Infrared Device, or Network Card
1.
Close all Windows programs and open the Control Panel by selecting
Start > Settings > Control Panel
.
2.
Double click the
System
icon.
3.
Click the
Hardware
tab.
4.
Click the
Device Manager
button.
5.
Locate the device that you want to disable:
ᮣ
If you want to disable an internal modem, expand the
Modem
tree by clicking the “+” sign to its left.
ᮣ
If you want to disable an infrared device, expand the
Infrared
Devices
tree by clicking the “+” sign to its left.