Siemens SOFTPHONE OC130S User Manual
Page 3
E
4. Audio Setup – make sure you choose the IPP device as shown below.
5. Set the Voice Channel of the Default Device to the Eutectics device id (IPP400 or any
of the IPP Internet Power Phone devices). On Windows 2000, ME or 98 this will be
USB Audio rather than a specific device name.
6. Set the Signal Channel device to your PC sound card so you will be able to hear the
ring when another user is calling you. On some of the Eutectics IPP phone models
the phone itself has an external ringer which will also sound when you are called.
7. OPTIONALLY – if you have a Eutectics Device that has external ringer (such as the
IPP500 series, IPP400 or IPP2000) – you can set up the Ringer to be controlled by
the Opticlient. To do this two operations are needed. First – select the Signal
Response to be the IPP device rather than the soundcard. Second choose the
OCRing.wav file (located in the install folder where you installed the Eutectics
integration – typically C:\Program Files\Eutectics\IPPNNN – as shown below in the
RING dialog of the Opticlient.
Page
3
06/17/2010