Sanyo VPC-CG65PX. - Manual (Page 162)

English
148
CHECKING THE REMAINING
INTERNAL AND CARD MEMORY
You can check how many images can be captured and how much audio and video
recording time is available in the internal memory and on the card. For a table showing
the maximum number of images and recording time for the internal memory and for
specific cards, please see “Possible No. of Images/Possible Shooting Time/Possible
Recording Time” on page 183.
Checking the remaining number of images and
video recording time
1
Turn on the camera (page 28).
h The remaining number of images
appears in the upper left of the monitor.
h The remaining video recording time
appears in the upper right of the monitor.
h The remaining number of images and
video recording time will differ depending
on the resolution and compression
settings.
h When the remaining number of images
or the remaining video recording time is
“0”, you cannot capture any more
images. To capture more images, either
install a new card, or save the images to
a computer and then delete them (page 96) from the card.
h When the remaining number of images or the remaining video recording time
is “0”, it may be possible to capture a few more images by setting a lower
resolution setting (page 67), or selecting a different image quality setting.
For audio data
1
Set the camera to the audio
recording mode (page 55).
h The remaining audio recording time is
shown.
12 00:00:58
Remaining number of images
Remaining video
recording time
12 00:16:00
Remaining recording time