Sanyo VPC-CG65PX. - Manual (Page 140)

English
126
OPERATION SOUNDS
Use this menu to set the confirming audio signals when the camera is turned
on/off or when the operation buttons ([
] button, SET button, MENU
button, etc.) are pressed, to adjust the operation sound volume, and to
enable/disable the audio guide.
1
Display the OPTION MENU (page 122).
2
Select the operation beep icon ?,
and press the SET button.
h The Operation Beep Setting Screen
appears.
h The current settings are shown on
the screen.
h If “ALL OFF” is selected and the
SET button pressed, all the
operation sounds are muted.
h When “ALL OFF” is selected, the
“CHANGE SETTINGS” indication
changes to “ON”. If “ON” is then
selected and the SET button is
pressed, “ON” changes to
“CHANGE SETTINGS”.
TURN ON/OFF:
Mute or enable the sound that is
produced when the power is turned on
or off.
SHUTTER:
Select the sound that is produced
when the [
] button is pressed.
KEY SW:
Select the sound that is produced
when the SET button, MENU button,
etc. are pressed.
AUDIO GUIDE:
Mute or enable the camera’s audio
help guide.
AUDIO GUIDE
KEY SW
SHUTTER
TURN ON/OFF :ON
:D
:A
:ON
OPERATION BEEP
ALL OFF
CHANGE SETTINGS
OK
AUDIO GUIDE
KEY SW
SHUTTER
TURN ON/OFF :OFF
:OFF
:OFF
:OFF
OPERATION BEEP
ALL OFF
ON
OK
<“ALL OFF” is selected>