Sanyo VPC-CG65PX. - Manual (Page 141)

127
English
OPERATION SOUNDS
3
Select “CHANGE SETTINGS”, and
press the SET button.
h The screen to change the settings
appears.
4
Toggle the SET button up or down
to select the desired setting, and
press the SET button.
h The screen to select operation
sounds appears.
h The respective screen to enable or disable the sound appears.
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
ON:
Activates the sound.
OFF: Deactivates the sound.
h The screen to select the operation sounds appears.
h Select from 8 different sounds (A to H).
h You can toggle the SET button to the right to preview the selected
operation sound.
h If “OFF” is selected, no sound is produced.
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
h The screen to select the volume for the operation sounds appears.
h You can select an operation sound volume from 1 (minimum) to 7
(maximum).
h Toggle the SET button up or down to select the volume, and press
the SET button.
AUDIO GUIDE
KEY SW
SHUTTER
TURN ON/OFF ON
D
A
ON
4
OPERATION BEEP
OK
OPERATION VOL