Sony SNC-CS50N - Manual (Page 45)

A
d
mini
s
tra
ting
t
he
Came
ra
Sending Images to FTP Server — FTP client Menu
45
Sending Images to FTP
Server
— FTP client Menu
When you click FTP client in the Administrator menu,
the FTP client menu appears.
Use this menu to set up for capturing and sending still
images to an FTP server. Using FTP client function, you
can send an image and audio file that has been shot and
recorded linked with the external sensor input or with
the built-in object detection function to an FTP server.
The image file can also be sent periodically.
The FTP client menu consists of three tabs: Common,
Alarm sending and Periodical sending.
Common Tab — Setting the FTP
client function
FTP client function
To activate the FTP client function, select On.
Note
The frame rate and operability on the main viewer may
be reduced while a file is being transmitted by the FTP
client function.
FTP server name
Type either the FTP server name to upload still images
using up to 64 characters, or the IP address of the FTP
server.
User name
Type the user name for the FTP server using up to 64
characters.
Password
Type the password for the FTP server using up to 64
characters.
Re-type password
To confirm the password, type the same characters as
you typed in the Password box.
Passive mode
Set whether you use the passive mode of FTP server or
not when connecting to the FTP server. Select On to
connect to the FTP server using the passive mode.
OK/Cancel
See “Buttons common to every menu” on page 26.
Alarm sending Tab — Setting the
FTP client action when detecting
the alarm
Set to forward an image and audio file to the specified
FTP server linked with alarm detection by the external
sensor input or by the built-in object detection function.
Alarm sending
Select On to send the image and audio file to the FTP
server linked with alarm detection.
Remote path
Type the path to the destination using up to 64
characters.
Image file name
Type the file name you want to assign to the images
when sending to the FTP server. You can use up to 10
alphanumeric characters, - (hyphen) and _ (underscore)
for naming.