Sony SNC-CS50N - Manual (Page 37)

A
d
mini
s
tra
ting
t
he
Came
ra
Configuring the Network — Network Menu
37
Wireless Tab — Setting of wireless
connection
Insert the specified wireless card into the PC card slot of
the camera, and set the items for connecting to the
wireless network.
Before setting, read the operation manual and
installation manual supplied with the wireless card
together with this guide.
Verified wireless cards
Sony Wireless Card SNCA-CFW1 (not supplied) with a
commercially available CompactFlash type II-PCMCIA
adapter
Notes
• Before removing the wireless card from the camera,
turn off the power of the camera.
• The throughput of the data transmission/reception via
the network cable may decrease when the wireless
card is in use.
MAC address
Displays the MAC address of the wireless card inserted
to the PC card slot.
If a wireless card is not inserted, “00:00:00:00:00:00” is
displayed.
IP address
Configure the IP address for a wireless network.
Obtain an IP address automatically (DHCP): Select
this option when a DHCP server is installed on the
network to allow IP address assignment. With this
setting, the IP address is assigned automatically.
Use the following IP address: Select this option when
you set a fixed IP address. With this setting, specify
the IP address, Subnet mask and Default gateway
manually.
Note
When you select Obtain an IP address automatically
(DHCP), make sure that a DHCP server is operating on
the network.
IP address
Type the IP address of the camera.
Subnet mask
Type the subnet mask.
Default gateway
Type the default gateway.
DNS server
Configure the DNS server address.
Obtain DNS server address automatically: Select this
option to obtain the address of DNS server
automatically. It can be set only when Obtain an IP
address automatically (DHCP) is selected.
Use the following DNS server address: Select this
option when you set a fixed address as the IP address
of DNS server. With this setting, specify the
addresses on Primary DNS server and Secondary
DNS server manually.
Note
When you select Obtain DNS server address
automatically, make sure that a DHCP server is
operating on the network.
Primary DNS server
Type the IP address of the primary DNS server.
Secondary DNS server
Type the IP address of the secondary DNS server.
Type
Select the network connection type.
Ad hoc mode: Select this when connecting to a
computer directly. With this setting, specify a
wireless channel.
Infrastructure mode: Select this when connecting to a
computer via an access point or a wireless router.
Note
The setting of the HTTP port number is common to the
setting in the Network tab.