Sceptre X23PV-KOMODO - Manual (Page 71)

SCEPTRE X23 HDTV User Manual
- 71 -
www.SCEPTRE.com
Problems Solutions
SWITCHING A
CHANNEL OR
SOURCE CHANGES
THE VOLUME Different channels and inputs will sometimes have this effect
because the channel signal’s own volume is already loud.
There is no way remove this completely. The TV has an
AUTO VOLUME LEVEL function that can combat this type of
effect. Please make sure that function is turned on.
THERE IS NOISE OR
TRASH PIXELS ON
THE SCREEN When your LCD HDTV’s resolution is higher than the digital
channel’s broadcast resolution, the signal is up-converted to
match your TV’s resolution. Up-converting can cause this type
of effect.
TIPS FOR HIGH
DEFINITION USERS The X23 LCD HDTV is an ideal platform for viewing High
Definition Content. The best image quality can be achieved by
HDMI, YPbPr (Component), then VGA. However, due to
variances in broadcast practices, it is possible some image
distortions can occur.
TIPS FOR
LETTERBOX
CONTENT USERS Letterboxed (Widescreen) versions of DVD movies are most
commonly formatted for standard 4:3 TVs. The X23 LCD
HDTV has the capability of expanding this content so the
entire screen is filled at the expense of the image proportion.
To use this function press the aspect button on the remote
control and cycle among the available options.
I CANNOT FIND THE
VOLUME AND
CHANNEL
CHANGING
BUTTONS The buttons are represented by the ▲▼◄► buttons located
on the remote control. ▲▼ changes the channels and ◄►
changes the volume.
I CANNOT FIND
ENTER BUTTON The enter button has the symbol ↵. It is located in the center
of the ▲▼◄► buttons.
TV TURNS OFF
AUTOMATICALLY
AFTER 5 MINUTES The TV features a power saving mode which will automatically
turn off the TV, if there’s no signal provided for more than 5
minutes.
I CANNOT DO 1080P
UNDER COMPONENT The 1080p scaled resolution is only possible under HDMI.