Sceptre X23PV-KOMODO - Manual (Page 70)

SCEPTRE X23 HDTV User Manual
- 70 -
www.SCEPTRE.com
Problems Solutions
TV CHANNELS ARE
BLOCKED
Check your auto lock function’s settings inside the OSD. You
may have locked up some channels but forgot about them.
UNIVERSAL
REMOTE CODE
This TV follows SONY’s universal remote code. Please check
your hand book for SONY’s codes then apply them.
THE TV TURNS ON
OR OFF SLOWLY
AND THE SCREEN
SHOWS UP
SLOWLY
This TV is a High Definition liquid crystal display panel TV. It
requires a few more seconds than normal TVs to power up and
show the picture.
NO SOUND ON PC Make sure you have a 3.5 mm mini-jack cable connected from
your pc’s sound output to the TV’s VGA STEREO INPUT.
HDCP VIDEO SAYS
NO HDCP SUPPORT Reboot your HDCP video device but turning them off and
unplugging the power cord. Wait up to 8 minutes to plug the
power back in to see if it works or not.
HDCP VIDEO HAS
NO AUDIO Make sure you have a 3.5 mm mini-jack cable connected from
your HDCP video device’s sound output to the TV’s VGA
STEREO INPUT. If your HDCP video device uses RCA AUDIO
jacks, you’ll need to obtain a RCA audio converted into 3.5 mm
mini-jack cable.
CANNOT GET
1366X768 ON PC
VGA Although the screen’s max resolution is 1366x768, no video
card maker can support such resolution. The industry standard
for similar resolution support is 1360x768. Please use that as
you resolution.
PICTURE IS
DISTORTED OR
HAS ABNORMAL
SOUND This might be from interference from large electrical appliances,
cars, motorcycles, or fluorescent lights. If the TV is close to the
wall, try moving the TV to another room in your house to see if
the problem still occurs.
PICTURE DOES
NOT COVER THE
ENTIRE SCREEN If you’re using HDMI or a TV digital channel make sure you use
the ASPECT button to switch to FULL format. If you are using
VGA, use the AUTO ADJUST function to adjust to the screen.
Please Note : If you are using regular analog TV, AV, or
component in 480i resolution, use the ASPECT button to switch
to FULL in order to fill up the screen. Please Note : This note
this feature will distort the picture.
PICTURE QUALITY
IS HORRIBLE!! For best image quality, view HD widescreen programs where
possible. If HD content is not available view “Standard
Definition” from a digital source. Standard, analog TV will
always be noticeable inferior to HD because your X23 LCD
HDTV has video that is many times better than old TV’s and so
you can see interference and deficiencies you did not KNOW
you had.
PICTURE HAS
PIXELS THAT ARE
ALWAYS
DISPLAYING THE
SAME COLOR Your X23 LCD HDTV is manufactured using an extremely high
level of precision technology, however, sometimes some pixels
of your X23 LCD HDTV may not display. Pixels defects within
industry specifications are inherent to this type of product and
do not constitute a defective product.