Connecting your antenna or cable to tv – Sceptre X23PV-KOMODO User Manual
Page 21
SCEPTRE X23 HDTV User Manual
- 21 -
www.SCEPTRE.com
Connecting Your Antenna or
Cable to TV
If You Have Digital Cable without Cable Box or
Antenna…
1.
Make sure the power of X23 LCD HDTV is turned off.
2.
Connect the Coaxial RF cable from your antenna or digital cable to the
TV port on the back of your X23 LCD HDTV.
3.
Turn on X23 LCD HDTV.
4.
Select TV (Air) for antenna or TV (Cable) for digital cable from either
your remote control’s source button or source button on the right side of
the TV.
5.
Use the On Screen Display to scan for channels.
Please Note :
•
Not all broadcasts are in High Definition (HD). Please refer to your
local broadcasting stations for more information.
•
The X23 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot achieve
that signal level with your antenna or cable, your X23 LCD HDTV
might lose picture or sound.