SMC Networks Barricade SMCWBR14-G - Manual (Page 42)

Configuring the Wireless Barricade g Router
30
Advanced Setup
Use the web management interface to define system
parameters, manage and control the Wireless Barricade and its
ports, or monitor network conditions. The following table outlines
the selections available.
Menu Description
System Sets the local time zone, the password for administrator access,
the Internet security of ZoneAlarm Pro (optional), system log
server, and the IP address of a PC that will be allowed to
manage the Wireless Barricade remotely.
WAN Specifies the Internet connection type:
• Dynamic IP host configuration and the physical MAC address
of each media interface
• PPPoE configuration
• PPTP configruation
• Static IP and ISP gateway address
• BigPond (Internet service available in Australia)
• Specifies DNS servers to use for domain name resolution.
LAN Sets the TCP/IP configuration of the Wireless Barricade’s LAN
interface and all DHCP clients.
Wireless Configures the radio frequency, SSID, encryption and 802.1x
security, and WDS for wireless communications.
NAT Shares a single ISP account with multiple users, sets up virtual
servers.
Firewall Configures a variety of security and specialized functions,
including: Access Control, Hacker Prevention, and DMZ.
DDNS Dynamic DNS provides users on the Internet with a method to
tie their domain name to a computer or server.
UPnP With Universal Plug and Play, a device can automatically join a
network, obtain an IP address, communicate its capabilities, and
learn about the presence and capabilities of other devices.
Devices can then directly communicate with each other. This
further enables peer-to-peer networking.