Over-exposure warning – SIGMA SD15 User Manual
Page 93

92
OVER-EXPOSURE WARNING
It is possible to indicate the over-exposed areas by highlighting them in red.
TO TURN ON OVER-EXPOSURE WARNING
1
Make sure the camera is turned on.
2
Press the
button on the back of the camera to display the Camera Set-up
Menu. (See P.28)
3
Use
arrows on the 4-way controller to select [Exposure Warning].
4
Press arrow or
to open sub-menu.
5
Use
arrows on the 4-way controller to select “On”.
6
Press
arrow or
to apply the setting or arrow or
to close the
sub-menu without making any changes.
TIP
•
The
button can be used as a shortcut key to temporarily toggle the
over-exposure warning overlay on or off. Using the shortcut key will not
change the Exposure Warning setting in the Set-up Menu. (See P.105 to
set OK key shortcut.)