SIGMA SD15 User Manual
Page 119

118
COLOR LCD MONITOR MESSAGES
“No Memory Card”
►
Please Insert the Card. (P.34)
“Card Error”
►
Format card. If the error persists, replace with new card. (P.36)
►
The Card may be damaged.
“Card Locked!”
►
The write protection switch of the card is in the ‘LOCK’ position. Eject the
card and then unlock the write protection switch on the card (P.10)
“Card Full”
►
Delete unwanted photos, choose a lower resolution setting, or use a
different card. (P.34-35) (P.94-96)
“No images on Memory card”
►
To review images, insert a card with valid SD15 images, capture new
images onto the card, or press
button again to turn off display.
“Cannot preview this image”
►
It may have been taken by another camera or the image data may have
collapsed.
“Cannot magnify this image”
►
It may have been taken by another camera or the image data may have
collapsed.
“Cannot save this image!”
►
The Card may be damaged. Please transfer the data to another hardware
such as a PC and then format the Card in the PC. If the same message is
displayed, the Card may have collapsed. Please use a new card.
An error has occurred! Error code # # #.
►
Turn the camera off and back on. If the problem persists, call Technical
Support and give them the error number.