SIGMA SD15 - Manual (Page 39)

38
FRAME NUMBER COUNTER
This display shows the number of images that can be recorded on the card.
z The number of images that can be recorded on the card depends on the
settings you choose.
For example, in the illustration on the left, 32 pictures can be
stored on the card. (The number shown in the counter is only
an estimate. The actual number of images, which can be
recorded, will depend on the subject, shooting conditions and
shooting mode.)
z Even if it is possible to record more than 9999 images on
the card, the maximum number of frames that can be
displayed by the counter is
.
z If no more space is available to store images on the card,
the frame number will be “ ” and the Shutter Speed
display will show “
” and blink.
z You can also see “ ” shown in the viewfinder.
z If a card is not inserted into the camera,“ ”appears on the
LCD panel.
z When the camera’s buffer is full, the frame number value
blinks on the top LCD panel. A cursor will be in motion on
the Shutter Speed display to show the progress. “
”
will be displayed in the Frame Number Counter.
z The shutter will not release when the camera is busy with
processing. It is necessary to await the end of the
processing before taking a picture.