beautypg.com

Using alternative power sources, Uso de fuentes de alimentación alternativas – Sony GV-D300 User Manual

Page 17

background image

17

Advanced operations / Operaciones avanzadas

Using the battery pack

This VCR operates with the “InfoLITHIUM”
battery pack (not supplied). If you use any other
battery pack to operate your VCR, the VCR may
not operate or the battery life may be shortened.

“InfoLITHIUM” is a trademark of Sony
Corporation.

Charging the battery pack

(1)Set the mode change switch to CHARGE.
(2)Connect the power cord to a wall outlet. The

beep sounds and the display window lights
up.

(3)Install the battery pack. Charging begins.

When the remaining battery indicator
becomes

and the CHARGE lamp lights

up, normal charge is completed. For a full
charge, which allows you to use the battery
slightly longer than “normal charge,” leave
the battery pack attached until the CHARGE
lamp goes out and the remaining battery
indicator becomes

.

(4)Remove the battery pack. The battery pack

can be used even if the charging is not
completed.

Remaining battery indicator

Normal charge

Full charge

Using alternative power
sources

CHARGE

Uso de fuentes de
alimentación alternativas

Uso del paquete de batería

Esta videograbadora funciona con el paquete de
batería “InfoLITHIUM” (no suministrado). Si
utiliza otro tipo de paquete para emplear la
videograbadora, es posible que ésta no funcione
o que la duración de la batería se reduzca.

“InfoLITHIUM” es una marca comercial de Sony
Corporation.

Carga del paquete de batería

(1)Ajuste el interruptor de modo en CHARGE.
(2)Conecte el cable de alimentación a la toma de

corriente. La unidad emite un pitido y el visor
se ilumina.

(3)Instale el paquete de batería. Se inicia la carga.

Cuando el indicador de batería restante
muestre

y el indicador CHARGE se

ilumine, significa que la carga normal ha
finalizado. Para obtener una carga completa,
que permite utilizar el paquete durante un
espacio de tiempo ligeramente superior que la
“carga normal”, deje dicho paquete fijado
hasta que el indicador CHARGE se apague y
el indicador de batería restante aparezca como

.

(4)Extraiga el paquete de batería. Éste puede

utilizarse aunque la carga no haya finalizado.

Indicador de batería restante

Carga normal

Carga completa

3

2

4

1