Standard Horizon Gx5500s - Manual (Page 61)

Page 61 GX5500S
12.5 TRUE MAGNETIC CHANGE (NAV DISPLAY)
This selection allows customizing the GPS COG (Course Over Ground) dis-
played on the LCD to be in True or Magnetic.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Press the [ENT] key, then select “ Magnetic Magnetic Magnetic Magnetic Magnetic” in the
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “
Mag- Mag- Mag- Mag- Mag-
netic netic netic netic netic” or “True True True True True.”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [16/9] key.
12.6 PRIORITY CHANNEL SET
Allows selection of the priority channel when priority scan is enabled.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Press the [ENT] key, then select “ Priority CH Priority CH Priority CH Priority CH Priority CH” in the
“ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the chan-
nel to be a priority.
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [16/9] key.