Standard Horizon Gx5500s - Manual (Page 42)

GX5500S Page 42
of the persons you wish to call, similar to a cellular phones telephone directory.
1. Press and hold down the [CALL(MENU)] key
until “ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select
“ DSC Setup DSC Setup DSC Setup DSC Setup DSC Setup” menu.
3. Press the [ENT] key, then select “ Individual Di- Individual Di- Individual Di- Individual Di- Individual Di-
rectory rectory rectory rectory rectory” with the CHANNEL selector knob.
4. Press the [ENT] key.
5. Select “
Add Add Add Add Add” with the CHANNEL selector knob,
then press the [ENT] key.
6. Press the one of the Keypad keys to enter the first
letter of the name of the vessel or person you want
to reference in the directory.
Example: Press the [2(MEM)] key repeatedly to
toggle among the seven available characters asso-
ciated with that key:
2 2 2 2 2
Æ
A A A A A
Æ
B B B B B
Æ
C C C C C
Æ
a aa aa
Æ
b bb bb
Æ
c cc cc
Æ
2 2 2 2 2 ....
If a mistake was made entering in the name, press-
ing the [CLR] key to delete the wrong character.
7. Press the [ENT] key to store the first letter in the name and step to the next
letter to the right.
8. Repeat step 6 and 7 until the name is complete. The name can consist of
up to eleven characters, if you do not use all eleven
characters press the [ENT] key to move to the next
space. This method can also be used to enter a blank
space in the name. If a mistake was made entering
in the name repeat pressing the [H/L] key until the wrong character is
selected, then enter the correct character.
9. After the eleventh letter or space has been entered, press and hold the
[ENT] key to advance to the MMSI (Maritime Mobile Service Identity Num-
ber) number entry.
10. Enter the desired number by the keypad. If a mis-
take was made entering in the MMSI number re-
peat pressing the [H/L] key until the wrong number
is selected, then enter the correct number.
11. To store the data entered, press and hold the [ENT]
key.
12. To enter another individual address, repeat steps 5
through 11.
13. Press the [CLR] key twice to return to the “ Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup” menu, then press
the [CLR] key again to return to radio operation.