Siemens A110 - Manual (Page 10)

10
Manually registering Gigaset A 11 handsets.
You can register up to three Gigaset A 11 handsets on your Gigaset A 110.
However, internal calls between the handsets are not possible.
Gigaset A 11 handset on Gigaset A 110 base
Manual registration is necessary if
◆ automatic registration was unsuccessful,
◆ the handset supplied has been replaced.
Step 1:
Step 2:
Place handset on the base.
After registration, the handset reverts to idle status and you hear the
confirmation tone.
Gigaset A 11 handset on other GAP bases
Step 1:
Set the base to a status where it is ready for registration (see operating manual
for the base).
Step 2:
After registration the handset reverts to idle status.
g
Open the menu.
[______________________________________________]
s
REGISTER HS
g
Select the menu item and confirm.
[______________________________________________]
BASE
g
Confirm. The display shows
"*--*--*".
g
Open the menu.
[______________________________________________]
s
REGISTER HS
g
Select the menu item and confirm.
[______________________________________________]
s
GAP 1
g
Select the menu item and confirm.
"PIN" appears in the display.
Enter the registration PIN for the
GAP base that is ready for registration
(e.g. "0000").
g
Confirm entry.
Ontario.fm Seite 10 Freitag, 28. November 2003 2:35 14