Sony MDS-JE770 - Manual (Page 45)

Ad
diti
onal
Inf
o
rm
ation
filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB05OPE-
U2.fm]
45
model name1[MDS-JE770] model name 2 [MDS-JE470]
[4-233-926-12(1)]
masterpage:Left
(3 column)
C71/Din Unlock
• The sporadic appearance of this message is
caused by the digital signal being recorded. This
will not affect the recording.
• While recording from a digital component
connected through the DIGITAL IN connector,
the digital connecting cable was unplugged or the
digital component turned off.
, Connect the cable or turn the digital
component back on.
E0001/MEMORY NG
• There is an error in the internal data that the deck
needs in order to operate.
, Consult your nearest Sony dealer.
E0101/LASER NG
• There is a problem with the optical pickup.
, The optical pickup may have failed. Consult
your nearest Sony dealer.
The following table explains the various
messages that appear in the display. Messages
are also displayed by the deck’s Self-diagnosis
function (see page 44).
Auto Cut
The Auto Cut Function is on (page 16).
Blank Disc
A new (blank) or erased MD has been inserted.
Cannot Copy
An attempt was made to make a second copy from
a digitally dubbed MD (page 43).
Cannot Edit
An attempt was made to edit the MD during
Program or Shuffle Play or to change the recording
level of an MD recorded in LP2 or LP4 Stereo
mode.
Disc Full
The MD is full (page 42).
Group Full!
An attempt was made to create a new group in
excess of the maximum number of groups, or there
are insufficient characters for updating the group
management information.
Impossible
The deck cannot do the recording or editing
operation (pages 27 and 28).
Incomplete!
The S.F Edit (changing the recording level after
recording, Fade-in, Fade-out) operation was not
performed properly because the deck was moved
while recording was in progress or the MD is
damaged or dirty.
Initialize (flashing)
The Setup Menu settings have been lost.
Or the contents recorded by the timer have
disappeared over time and are not be available for
saving to disc, or Program Play could not be
activated since the program has disappeared over
time.
(The message flashes for about four seconds when
you turn on the deck by pressing ?/1.)
Name Full!
The naming capacity of the MD has reached its
limit (about 1,700 characters).
No Change
While attempting to change the recording level
after recording, you pressed AMS or YES without
actually changing the recording level, so no change
was made.
No Disc
There is no MD in the deck.
No Name
The track or disc has no name.
No Program!
You tried to start Program Play when no program
exists.
Premastered
An attempt was made to record or edit to a
premastered MD.
ProgramFull!
The program contains the maximum number of
tracks. You cannot add any more tracks.
REMOTE
The MD is being controlled by an external device
connected to the deck.
1)
S.F Edit!
You attempted to perform another operation while
in S.F Edit (changing the recording level after
recording, Fade-in, Fade-out) mode.
You cannot perform any other operations while in
S.F Edit mode.
Display messages